Short answer: Choose the 15-inch SR1 if you want the smallest shelf footprint: it is about 38 cm long and the live listing says to allow 42 cm. Choose an SR2 if you want a larger display model and a standard-base or wall-mount option: the 20-inch model needs about 55 cm of shelf run, while the 23-inch model needs about 63 cm. All three current listings are for physical, fully assembled, multicolour PLA display models rather than digital downloads, and fine FDM layer lines can be visible up close.
Compare the live PrintVerse3D options
| Current model | Physical length | Planning allowance | Configuration | Current price | Availability |
|---|---|---|---|---|---|
| 15-Inch SSV Normandy SR1 | 15 in / about 38 cm | Allow 42 cm on a shelf | One catalogue configuration; fully assembled | AU$259.95 | Available |
| 20-Inch SSV Normandy SR2 | 20 in / about 51 cm | Allow 55 cm on a shelf, or plan wall space | Standard or Wall Mount Stand; fully assembled | AU$289.95 | Available |
| 23-Inch SSV Normandy SR2 (Large) | 23 in / about 59 cm | Allow 63 cm on a shelf, or plan wall space | Standard or Wall Mount Stand; fully assembled | AU$329.95 | Available |
Prices, options and availability were checked against the live PrintVerse3D listings on 7 September 2026. The product page at checkout is the current source if any catalogue detail changes.
Choose the SR1 for the smallest verified shelf allowance
The 15-Inch SSV Normandy SR1 is the compact choice in this live group. Its listing gives a physical length of about 38 cm and asks buyers to allow 42 cm on a shelf. It ships as one configuration, as shown in its catalogue photos.
Choose the 20-inch SR2 for a larger model with two stand choices
The 20-Inch SSV Normandy SR2 is about 51 cm long. Plan about 55 cm of shelf run for the Standard option, or select the Wall Mount Stand option when wall display better fits your room. Both current stand choices are listed at the same price.
Choose the 23-inch SR2 only when you have the verified clearance
The 23-Inch SSV Normandy SR2 (Large) is about 59 cm long and its listing recommends 63 cm of shelf allowance. It also offers Standard and Wall Mount Stand choices. Measure first: this option requires 8 cm more shelf run than the 20-inch SR2.
What arrives and what to expect from the finish
Each linked listing supplies a physical model, not an STL, 3MF or other digital file. The models are printed in PLA with colour laid down during multicolour printing, then hand-assembled and finished in Sydney. Because they are made with FDM printing, fine layer lines are visible up close; the product listings describe that texture as part of the process rather than a defect.
The SR1 listing says it ships as shown in its photos. The 20-inch and 23-inch SR2 listings present Standard and Wall Mount Stand as selectable stand types, so choose the intended display method before checkout rather than assuming the same setup for every model.
Check these details before ordering
- Measure the clear shelf run or usable wall area, including safe handling room.
- Choose the SR1 or SR2 version you actually want, then choose the size.
- For either SR2, select Standard or Wall Mount Stand on the live product page.
- Review the real catalogue photos for colour, stand presentation and visible FDM texture.
- Confirm the current price and availability on the product page before checkout.
Fan-made physical display models. Not affiliated with or endorsed by BioWare or the rights holders of Mass Effect.