{"title":"Star Trek","description":"\u003cp\u003eSixty-seven Star Trek pieces, split between starships and hand props - ships from 9 to 21.5 inches, and props built to be picked up rather than only looked at.\u003c\/p\u003e\u003cp\u003eOn the ship side the collection is deliberately deep on the Constitution line: the original NCC-1701 at 18.5 inch, the refit NCC-1701-A at 17 and 20 inch, the Neo-Constitution NCC-1701-G, and the Titan NCC-80102-A at 17 and 21.5 inch. Around it sit the NX class at 13 and 16 inch in standard and refit configurations, Intrepid-class Voyager at 17 inch, the Defiant at 9.6 inch, the Galaxy-class NCC-1701-D at 12 inch, the Romulan D'deridex warbird at 12 inch, the Prometheus at 18 inch, the Declaration-class XCV-330 and the Nova-class Cochrane.\u003c\/p\u003e\u003cp\u003eThe props run across every era: the TOS type-II hand phaser and tricorder, TNG's cobrahead and dustbuster phasers and the type-I, the TR-560 tricorder with scanner attachments, the hypospray, PADDs from Voyager, Deep Space Nine, Bajor and Strange New Worlds, Klingon and Strange New Worlds communicators, the TMP wrist communicator, a 29th-century phaser and tricorder, a Ferengi hand phaser, the Lower Decks phaser with holster, a Klingon d'k tahg, the Discovery tricom badge, Phlox's medical scanner and Picard's mobile holo-emitter. A few use magnets so they open and close the way they should.\u003c\/p\u003e","products":[{"product_id":"wok-and-tmp-phaser-with-stand-and-holster-magnetic-attachable-3d-printed-fully-colored-and-assembled","title":"WOK and TMP Phaser with Stand and Holster - Magnetic Attachable","description":"\u003cp\u003e\u003cstrong\u003eThe Wrath of Khan phaser replica\u003c\/strong\u003e is a physical Star Trek display prop with magnetically attaching holster, 3D printed in PLA and made in Sydney. Choose phaser, holster, stand and left- or right-hand options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — phaser + holster + stand \u003cem\u003eAU$124.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser + Holster\u003c\/strong\u003e — for wearing, no stand \u003cem\u003eAU$119.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser + Stand\u003c\/strong\u003e — for display, no holster \u003cem\u003eAU$119.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$114.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a replacement or spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRight Hand or Left Hand\u003c\/strong\u003e sets the holster orientation. Same price either way — choose the side you would actually wear it on.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the holster attach?\u003c\/strong\u003e\u003cbr\u003eMagnetically. The phaser holds in place and lifts straight out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich hand should I choose?\u003c\/strong\u003e\u003cbr\u003eThe side you wear it on. Right Hand is the more common choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set \/ Right Hand","offer_id":41842757402667,"sku":"PV-0002-A","price":124.95,"currency_code":"AUD","in_stock":true},{"title":"Full set \/ Left Hand","offer_id":41842757435435,"sku":"PV-0002-B","price":124.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Holster \/ Right Hand","offer_id":41842757468203,"sku":"PV-0002-C","price":119.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Holster \/ Left Hand","offer_id":41842757500971,"sku":"PV-0002-D","price":119.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Stand \/ Right Hand","offer_id":41842757533739,"sku":"PV-0002-E","price":119.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Stand \/ Left Hand","offer_id":41842757566507,"sku":"PV-0002-F","price":119.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Right Hand","offer_id":41842757599275,"sku":"PV-0002-G","price":114.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Left Hand","offer_id":41842757632043,"sku":"PV-0002-H","price":114.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Right Hand","offer_id":41842757664811,"sku":"PV-0002-I","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Left Hand","offer_id":41842757697579,"sku":"PV-0002-J","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/a7c20953-il_fullxfull.6644680546_i6gh.jpg?v=1750116950"},{"product_id":"nemesis-tricorder-and-stand-3d-printed-fully-colored-and-assembled","title":"Nemesis Tricorder and Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Nemesis tricorder replica\u003c\/strong\u003e is a physical Star Trek display prop with stand, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003cp\u003eThe Nemesis tricorder is the flatter, later-TNG-film design rather than the chunkier TR-560. If you want the one that opens, see \u003ca href=\"\/products\/tng-tr-560-tricorder-magnetic-open-close-scanner-attachments-3d-printed-fully-colored-with-stand\"\u003eTNG TR-560 Tricorder - Magnetic Open\/Close \u0026amp; Scanner Attachments\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it open?\u003c\/strong\u003e\u003cbr\u003eNo. This is the fixed-body Nemesis design. The TNG TR-560 is the one with magnetic open\/close.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eYes, the stand is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo — display prop, no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get it in a different colour?\u003c\/strong\u003e\u003cbr\u003eAsk before ordering and we will tell you what is possible.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842756190251,"sku":"PV-0003","price":134.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7026211915_6d00.jpg?v=1785826380"},{"product_id":"tr-590-tricorder-and-stand-3d-printed-fully-colored-and-assembled","title":"TR-590 Tricorder and Stand","description":"\u003cp\u003e\u003cstrong\u003eThe TR-590 tricorder replica\u003c\/strong\u003e is a physical Star Trek: Voyager display prop, 3D printed in PLA and made in Sydney. Choose the full set, tricorder, stand or holster in light or dark gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — tricorder + stand + holster \u003cem\u003eAU$239.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTricorder + Stand\u003c\/strong\u003e — for display \u003cem\u003eAU$224.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTricorder + Holster\u003c\/strong\u003e — for wearing \u003cem\u003eAU$224.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTricorder only\u003c\/strong\u003e — the unit on its own \u003cem\u003eAU$219.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLight Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eDark Gray\u003c\/strong\u003e is the same part in a darker body. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it open or light up?\u003c\/strong\u003e\u003cbr\u003eNo. It is a solid display and cosplay prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference from the TNG TR-560?\u003c\/strong\u003e\u003cbr\u003eDifferent era and different body. The TR-560 opens magnetically and has detachable scanner attachments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I wear it?\u003c\/strong\u003e\u003cbr\u003eYes — choose an option with the holster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set \/ Light Gray as Photos","offer_id":41842757042219,"sku":"PV-0004-A","price":239.95,"currency_code":"AUD","in_stock":true},{"title":"Full set \/ Dark Gray","offer_id":41842757074987,"sku":"PV-0004-B","price":239.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder + Stand \/ Light Gray as Photos","offer_id":41842757107755,"sku":"PV-0004-C","price":224.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder + Stand \/ Dark Gray","offer_id":41842757140523,"sku":"PV-0004-D","price":224.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder + Holster \/ Light Gray as Photos","offer_id":41842757173291,"sku":"PV-0004-E","price":224.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder + Holster \/ Dark Gray","offer_id":41842757206059,"sku":"PV-0004-F","price":224.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder only \/ Light Gray as Photos","offer_id":41842757238827,"sku":"PV-0004-G","price":219.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder only \/ Dark Gray","offer_id":41842757271595,"sku":"PV-0004-H","price":219.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray as Photos","offer_id":41842757304363,"sku":"PV-0004-I","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray","offer_id":41842757337131,"sku":"PV-0004-J","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/7927d08f-il_fullxfull.6778921782_6aly.jpg?v=1750116950"},{"product_id":"7-4-inch-defiant-class-nx-74205-defiant-3d-printable-fully-colored-and-assembled","title":"7.4-Inch Defiant Class NX-74205 Defiant","description":"\u003cp\u003e\u003cstrong\u003eThe 7.4-inch (19 cm) USS Defiant NX-74205 model\u003c\/strong\u003e is a physical Star Trek: Deep Space Nine display ship, 3D printed in multi-colour PLA. Choose fully coloured or glow-in-the-dark, pre-assembled or DIY kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e at 19 cm this is a desk piece. The larger \u003ca href=\"\/products\/9-6-inch-defiant-class-nx-74205-defiant-large-3d-printable-fully-colored-and-assembled\"\u003e9.6-Inch Defiant Class NX-74205 Defiant (Large)\u003c\/a\u003e at 25 cm is the shelf version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e19 cm \/ 7.4 inches. It sits on a desk or in a cabinet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the detail good at this size?\u003c\/strong\u003e\u003cbr\u003eThe Defiant is a compact, hard-edged hull, so it holds up well small — better than a saucer-and-nacelles design would.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price; the kit ships unassembled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger one?\u003c\/strong\u003e\u003cbr\u003eYes, 9.6 inch (25 cm).\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full colored \/ Pre-Assembled","offer_id":41842756911147,"sku":"PV-0005-A","price":199.96,"currency_code":"AUD","in_stock":true},{"title":"Full colored \/ DIY Kit","offer_id":41842756943915,"sku":"PV-0005-B","price":159.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ Pre-Assembled","offer_id":41842756976683,"sku":"PV-0005-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ DIY Kit","offer_id":41842757009451,"sku":"PV-0005-D","price":159.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/8bc965bb-il_fullxfull.6575061896_fr41.jpg?v=1750116951"},{"product_id":"uss-cerritos-padd-lower-decks-padd-3d-printed-fully-colored-and-assembled","title":"USS Cerritos PADD - Lower Decks PADD","description":"\u003cp\u003e\u003cstrong\u003eThe USS Cerritos PADD replica\u003c\/strong\u003e is a physical Star Trek: Lower Decks display prop, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003cp\u003eIf you want the alternate-reality red version of the same PADD, see \u003ca href=\"\/products\/alternate-reality-red-padd-lower-decks-padd-3d-printed-fully-colored-and-assembled\"\u003eAlternate-reality Red PADD - Lower Decks PADD\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the screen graphics printed or a sticker?\u003c\/strong\u003e\u003cbr\u003ePrinted into the PLA in multi-colour. They cannot peel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the screen light up?\u003c\/strong\u003e\u003cbr\u003eNo — it is a display prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eIt ships as shown in the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference from the red PADD?\u003c\/strong\u003e\u003cbr\u003eDifferent screen graphics from the alternate-reality episode. Same body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842756223019,"sku":"PV-0006","price":79.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7026197163_pxst.jpg?v=1785826355"},{"product_id":"alternate-reality-red-padd-lower-decks-padd-3d-printed-fully-colored-and-assembled","title":"Alternate-reality Red PADD - Lower Decks PADD","description":"\u003cp\u003e\u003cstrong\u003eThe alternate-reality red PADD replica\u003c\/strong\u003e is a physical Star Trek: Lower Decks display prop, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003cp\u003eFor the standard Cerritos PADD, see \u003ca href=\"\/products\/uss-cerritos-padd-lower-decks-padd-3d-printed-fully-colored-and-assembled\"\u003eUSS Cerritos PADD - Lower Decks PADD\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes this the alternate-reality version?\u003c\/strong\u003e\u003cbr\u003eThe screen graphics and the red body from the alternate-timeline episode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the graphics printed or a sticker?\u003c\/strong\u003e\u003cbr\u003ePrinted into the PLA — they cannot peel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eIt ships as shown in the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842756714539,"sku":"PV-0007","price":74.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/4c2724c1-il_fullxfull.6937027108_l081.jpg?v=1750116952"},{"product_id":"captain-janeways-coffee-cup-with-stand-and-holster-3d-printed-fully-colored-and-assembled","title":"Captain Janeway's Coffee Cup with Stand","description":"\u003cp\u003e\u003cstrong\u003eCaptain Janeway's coffee mug replica\u003c\/strong\u003e is a physical Star Trek: Voyager display prop, 3D printed in PLA and made in Sydney. Choose the full set, mug only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is a display replica, not drinkware.\u003c\/strong\u003e 3D-printed PLA is not food safe and should not hold liquid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — cup + stand \u003cem\u003eAU$59.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCup only\u003c\/strong\u003e — the cup on its own \u003cem\u003eAU$49.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I drink from it?\u003c\/strong\u003e\u003cbr\u003eNo. PLA is not food safe and the print is not watertight. It is a display piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. Cup only ships without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eIt is a display replica of the on-screen cup — check the photos for scale against the stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it dishwasher safe?\u003c\/strong\u003e\u003cbr\u003eNo. PLA deforms with heat. Wipe the outside only.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set","offer_id":41842756255787,"sku":"PV-0012-A","price":59.95,"currency_code":"AUD","in_stock":true},{"title":"Cup only","offer_id":41842756288555,"sku":"PV-0012-B","price":49.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only","offer_id":41842756321323,"sku":"PV-0012-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/227302e5-il_fullxfull.6984129973_p9qv.jpg?v=1750116950"},{"product_id":"22-inch-sovereign-class-ncc-1701-e-enterprise-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"22-inch Sovereign Class NCC-1701-E Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe USS Enterprise-E model\u003c\/strong\u003e is a physical Star Trek: First Contact display ship, 3D printed in PLA and made in Sydney. Choose 17-inch or 22-inch size and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003eThe Sovereign is a long, low hull, so it takes less shelf depth than its length suggests. At 43 cm it fits a normal bookshelf; at 54 cm allow about 58 cm of clear run.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich size should I get?\u003c\/strong\u003e\u003cbr\u003e43 cm \/ 17 inch for a bookshelf, 54 cm \/ 22 inch as a centrepiece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes, both sizes arrive fully assembled and colour-printed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price the same for both sizes?\u003c\/strong\u003e\u003cbr\u003eYes, both sizes are the same price.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Standard 43cm\/17inch \/ Fully colored","offer_id":41842757992491,"sku":"PV-0014-A","price":229.95,"currency_code":"AUD","in_stock":true},{"title":"Standard 43cm\/17inch \/ Glow in the dark","offer_id":41842758025259,"sku":"PV-0014-B","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Large 54cm\/22inch \/ Fully colored","offer_id":41842758058027,"sku":"PV-0014-C","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Large 54cm\/22inch \/ Glow in the dark","offer_id":41842758090795,"sku":"PV-0014-D","price":329.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/1ae523a0-il_fullxfull.6289355085_3v5z.jpg?v=1750116950"},{"product_id":"14-inch-galaxy-class-ncc-1701-d-enterprise-large-3d-printable-replica-fully-colored-and-assembled","title":"14.5-inch Galaxy Class NCC-1701-D Enterprise (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 14.5-inch (37 cm) USS Enterprise-D model\u003c\/strong\u003e is a physical Star Trek: The Next Generation display ship, 3D printed in multi-colour PLA and supplied fully assembled. Choose fully coloured or glow-in-the-dark finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 37 cm still shelves comfortably — allow about 41 cm. The \u003ca href=\"\/products\/12-inch-galaxy-class-ncc-1701-d-enterprise-3d-printable-replica-fully-colored-and-assembled\"\u003e12-inch Galaxy Class NCC-1701-D Enterprise\u003c\/a\u003e is the compact version if space is tight.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e37 cm \/ 14.5 inches. Allow about 41 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the extra size buy me?\u003c\/strong\u003e\u003cbr\u003eThe saucer's window rows and the nacelle detail read individually rather than as texture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored","offer_id":41842756550699,"sku":"PV-0015-A","price":229.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":41842756583467,"sku":"PV-0015-B","price":259.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/6dde4c2e-il_fullxfull.6383479505_9b7f.jpg?v=1750116950"},{"product_id":"tos-communicator-3d-printed-fully-colored-and-assembled","title":"TOS Communicator","description":"\u003cp\u003e\u003cstrong\u003eThe TOS communicator replica\u003c\/strong\u003e is a physical Star Trek: The Original Series display prop, 3D printed in PLA and made in Sydney. Choose the full set, communicator only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — communicator + stand \u003cem\u003eAU$120.00\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunicator only\u003c\/strong\u003e — the unit on its own \u003cem\u003eAU$115.00\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the lid flip open?\u003c\/strong\u003e\u003cbr\u003eThe grille lid is part of the printed body. Check the photos for how it is presented.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set","offer_id":41842756616235,"sku":"PV-0018-A","price":120.0,"currency_code":"AUD","in_stock":true},{"title":"Communicator only","offer_id":41842756649003,"sku":"PV-0018-B","price":115.0,"currency_code":"AUD","in_stock":true},{"title":"Stand only","offer_id":41842756681771,"sku":"PV-0018-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/71c87123-il_fullxfull.6754354763_72os.jpg?v=1750116950"},{"product_id":"13-8-inch-intrepid-class-ncc-74656-voyager-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"13.8-inch Intrepid Class NCC-74656 Voyager","description":"\u003cp\u003e\u003cstrong\u003eThe 13.8-inch (35 cm) USS Voyager NCC-74656 model\u003c\/strong\u003e is a physical Star Trek display ship, 3D printed in multi-colour PLA and supplied fully assembled. Choose fully coloured or glow-in-the-dark finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 35 cm shelves easily — allow about 39 cm. The larger \u003ca href=\"\/products\/17-inch-intrepid-class-ncc-74656-voyager-large-3d-printable-enterprise-replica-fully-colored-an\"\u003e17-inch Intrepid Class NCC-74656 Voyager (Large)\u003c\/a\u003e at 43 cm is the display version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e35 cm \/ 13.8 inches. Allow about 39 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the variable-geometry nacelles in the raised or lowered position?\u003c\/strong\u003e\u003cbr\u003eThey are printed in the cruise position as seen through most of the series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored","offer_id":41842758221867,"sku":"PV-0019-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":41842758254635,"sku":"PV-0019-B","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/aa0bd69a-il_fullxfull.6249202692_5g7a.jpg?v=1750116950"},{"product_id":"voy-dermal-regenerator-3d-printed-fully-colored-and-assembled","title":"VOY Dermal Regenerator","description":"\u003cp\u003e\u003cstrong\u003eThe dermal regenerator replica\u003c\/strong\u003e is a physical Star Trek: Voyager medical display prop, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003cp\u003eOne of the least expensive props in the range and an easy first Star Trek piece.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo — display prop, no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eIt is a handheld prop, sized to the on-screen tool. Check the photos for scale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eIt ships as shown in the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat else goes with it?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"\/products\/tng-voy-exoscalpel-3d-printed-fully-colored-and-assembled\"\u003eTNG\/VOY Exoscalpel\u003c\/a\u003e and the \u003ca href=\"\/products\/cortical-stimulator-3d-printed-fully-colored-and-assembled\"\u003eCortical stimulator\u003c\/a\u003e are from the same sickbay set.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842756747307,"sku":"PV-0021","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/e8dab03a-il_fullxfull.6899311116_7y9a.jpg?v=1750116950"},{"product_id":"16-inch-constitution-class-ncc-1701-enterprise-3d-printable-replica-fully-colored-and-assembled","title":"16-inch Constitution Class NCC-1701 Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 16-inch USS Enterprise NCC-1701 model\u003c\/strong\u003e is a physical Star Trek: The Original Series display ship, 3D printed in PLA. Choose assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 16 inches fits a standard bookshelf — allow about 45 cm of clear run. The larger \u003ca href=\"\/products\/18-5-inch-constitution-class-ncc-1701-enterprise-3d-printable-replica-fully-colored-and-assembl\"\u003e18.5-inch Constitution Class NCC-1701 Enterprise\u003c\/a\u003e at 47 cm is the version that reads as a centrepiece.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e41 cm \/ 16 inches long. Allow about 45 cm of shelf.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable. Display the ship mounted or detached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e16-inch or 18.5-inch?\u003c\/strong\u003e\u003cbr\u003e16-inch shelves easily. 18.5-inch (47 cm) is the display-piece size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the DIY Kit?\u003c\/strong\u003e\u003cbr\u003eThe same printed parts, unassembled, no glue.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Assembled","offer_id":41842758844459,"sku":"PV-0022-A","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kits","offer_id":41842758877227,"sku":"PV-0022-B","price":219.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Assembled","offer_id":41842758909995,"sku":"PV-0022-C","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kits","offer_id":41842758942763,"sku":"PV-0022-D","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/f8e2556d-il_fullxfull.6241664472_rcq2.jpg?v=1750116949"},{"product_id":"21-5-inch-neo-constitution-class-ncc-1701-g-enterprise-large-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"21.5-inch Neo Constitution Class NCC-1701-G Enterprise (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 21.5-inch (55 cm) USS Enterprise NCC-1701-G model\u003c\/strong\u003e is a physical Star Trek: Picard display ship, 3D printed in multi-colour PLA. Choose fully coloured or glow-in-the-dark, pre-assembled or DIY kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 55 cm is a sideboard or wide-shelf piece; allow about 60 cm. The \u003ca href=\"\/products\/17-inch-neo-constitution-class-ncc-1701-g-enterprise-3d-printable-replica-fully-colored-and-assembled\"\u003e17-inch Neo Constitution Class NCC-1701-G Enterprise\u003c\/a\u003e is the bookshelf size and also offers the Titan registry. For the Titan at this size, see \u003ca href=\"\/products\/21-5-inch-neo-constitution-class-ncc80102-a-titan-large-3d-printable-titan-replica-fully-colored-and-assembled\"\u003e21.5-inch Neo Constitution Class NCC80102-A Titan (Large)\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e55 cm \/ 21.5 inches. Allow about 60 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the Titan version?\u003c\/strong\u003e\u003cbr\u003eOnly the registry markings on the hull. The model is identical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price. The kit ships unassembled, no glue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller one?\u003c\/strong\u003e\u003cbr\u003eYes, the 17-inch (44 cm) version.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Pre-Assembled","offer_id":41842757795883,"sku":"PV-0024-A","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kit","offer_id":41842757828651,"sku":"PV-0024-B","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Pre-Assembled","offer_id":41842757861419,"sku":"PV-0024-C","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kit","offer_id":41842757894187,"sku":"PV-0024-D","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/bedd03ee-il_fullxfull.6762732781_qvyx.jpg?v=1750116951"},{"product_id":"tng-voy-exoscalpel-3d-printed-fully-colored-and-assembled","title":"TNG\/VOY Exoscalpel","description":"\u003cp\u003e\u003cstrong\u003eThe exoscalpel prop replica\u003c\/strong\u003e is a physical Star Trek: Voyager medical display piece, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eIt is a hand tool, sized to the on-screen prop. Check the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it have a moving blade?\u003c\/strong\u003e\u003cbr\u003eNo. It is a solid display piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eIt ships as shown in the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat else goes with it?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"\/products\/voy-dermal-regenerator-3d-printed-fully-colored-and-assembled\"\u003eVOY Dermal Regenerator\u003c\/a\u003e and the \u003ca href=\"\/products\/cortical-stimulator-3d-printed-fully-colored-and-assembled\"\u003eCortical stimulator\u003c\/a\u003e complete the sickbay set.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842757730347,"sku":"PV-0025","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/4cf64211-il_fullxfull.6984144589_sdnm.jpg?v=1750116950"},{"product_id":"12-inch-ambassador-class-ncc-1701-c-enterprise-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"12-inch Ambassador Class NCC-1701-C Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 12-inch USS Enterprise-C model\u003c\/strong\u003e is a physical Star Trek Ambassador-class display ship, 3D printed in PLA and made in Sydney. Choose pre-assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 31 cm sits on a desk or a standard shelf. The larger \u003ca href=\"\/products\/14-inch-ambassador-class-ncc-1701-c-enterprise-large-3d-printable-enterprise-replica-fully-colored-and-assembled\"\u003e14-inch Ambassador Class NCC-1701-C Enterprise (Large)\u003c\/a\u003e at 35 cm is the display version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e31 cm \/ 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Ambassador class rare as a model?\u003c\/strong\u003e\u003cbr\u003eIt is one of the less commonly produced Star Trek hulls, which is part of why we make it in two sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price; the kit ships unassembled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Pre-Assembled","offer_id":41842758451243,"sku":"PV-0026-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kit","offer_id":41842758484011,"sku":"PV-0026-B","price":189.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Pre-Assembled","offer_id":41842758516779,"sku":"PV-0026-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kit","offer_id":41842758549547,"sku":"PV-0026-D","price":209.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/a3ee4950-il_fullxfull.6226409106_ohsl.jpg?v=1750116950"},{"product_id":"voyager-neurocortical-monitor-3d-printed-fully-colored-and-assembled","title":"Voyager Neurocortical Monitor","description":"\u003cp\u003e\u003cstrong\u003eThe Seven of Nine neurocortical monitor\u003c\/strong\u003e is a physical Star Trek: Voyager display prop, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003cp\u003eBecause it is small and light, it is the easiest piece here to actually wear at a convention.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I wear it?\u003c\/strong\u003e\u003cbr\u003eIt is a small, light print. How you attach it is up to you — no adhesive is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eIt is sized to the on-screen prop. Check the photos for scale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eIt ships as shown in the photos.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842757763115,"sku":"PV-0028","price":44.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/a432136a-il_fullxfull.6899305394_b02g.jpg?v=1750116950"},{"product_id":"14-inch-ambassador-class-ncc-1701-c-enterprise-large-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"14-inch Ambassador Class NCC-1701-C Enterprise (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 14-inch USS Enterprise-C model\u003c\/strong\u003e is a physical Star Trek Ambassador-class display ship, 3D printed in PLA and made in Sydney. Choose pre-assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 35 cm shelves comfortably — allow about 39 cm. The \u003ca href=\"\/products\/12-inch-ambassador-class-ncc-1701-c-enterprise-3d-printable-enterprise-replica-fully-colored-and-assembled\"\u003e12-inch Ambassador Class NCC-1701-C Enterprise\u003c\/a\u003e is the compact version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e35 cm \/ 14 inches. Allow about 39 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller one?\u003c\/strong\u003e\u003cbr\u003eYes, 12 inch (31 cm).\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Pre-Assembled","offer_id":41842759270443,"sku":"PV-0034-A","price":259.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kit","offer_id":41842759303211,"sku":"PV-0034-B","price":219.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Pre-Assembled","offer_id":41842759335979,"sku":"PV-0034-C","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kit","offer_id":41842759368747,"sku":"PV-0034-D","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/6588ff35-il_fullxfull.6226409106_ohsl.jpg?v=1750116949"},{"product_id":"first-contact-boomerang-phaser-with-stand-3d-printed-fully-colored-and-assembled","title":"First Contact Boomerang Phaser with Stand","description":"\u003cp\u003e\u003cstrong\u003eThe First Contact Boomerang phaser replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the phaser, holster, stand or full set in dark or light gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set (w Holster)\u003c\/strong\u003e — phaser + holster + stand \u003cem\u003eAU$119.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser + Holster\u003c\/strong\u003e — for wearing \u003cem\u003eAU$114.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$109.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolster only\u003c\/strong\u003e — a spare holster \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDark Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eLight Gray\u003c\/strong\u003e is the same part in a paler body. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I wear it on a belt?\u003c\/strong\u003e\u003cbr\u003eYes — choose an option that includes the holster.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set (w Holster) \/ Dark Gray as Photos","offer_id":41842761138219,"sku":"PV-0052-A","price":119.95,"currency_code":"AUD","in_stock":true},{"title":"Full set (w Holster) \/ Light Gray","offer_id":41842761170987,"sku":"PV-0052-B","price":119.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Holster \/ Dark Gray as Photos","offer_id":41842761203755,"sku":"PV-0052-C","price":114.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Holster \/ Light Gray","offer_id":41842761236523,"sku":"PV-0052-D","price":114.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Dark Gray as Photos","offer_id":41842761269291,"sku":"PV-0052-E","price":109.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Light Gray","offer_id":41842761302059,"sku":"PV-0052-F","price":109.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray as Photos","offer_id":41842761334827,"sku":"PV-0052-G","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray","offer_id":41842761367595,"sku":"PV-0052-H","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Holster only \/ Dark Gray as Photos","offer_id":41842761400363,"sku":"PV-0052-I","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Holster only \/ Light Gray","offer_id":41842761433131,"sku":"PV-0052-J","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/1ace95c8-il_fullxfull.6862666224_jjmv.jpg?v=1750116950"},{"product_id":"tos-comms-earpiece-and-stand-3d-printed-fully-colored-and-assembled","title":"TOS Comms Earpiece and stand","description":"\u003cp\u003e\u003cstrong\u003eUhura's earpiece replica\u003c\/strong\u003e is a physical Star Trek: The Original Series display prop, 3D printed in PLA and made in Sydney. Choose the full set, earpiece only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — earpiece + stand \u003cem\u003eAU$44.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarpiece only\u003c\/strong\u003e — the earpiece on its own \u003cem\u003eAU$39.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I wear it?\u003c\/strong\u003e\u003cbr\u003eIt is a display replica. It is light, but it is not a functioning earpiece and has no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eSized to the on-screen prop — check the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes, AU$9.95.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set","offer_id":41842760384555,"sku":"PV-0053-A","price":44.95,"currency_code":"AUD","in_stock":true},{"title":"Earpiece only","offer_id":41842760417323,"sku":"PV-0053-B","price":39.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only","offer_id":41842760450091,"sku":"PV-0053-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/781b38f9-il_fullxfull.6628128781_mvig.jpg?v=1750116950"},{"product_id":"19-inch-excelsior-class-ncc-1701-b-enterprise-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"19-inch Excelsior Class NCC-1701-B Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 19-inch USS Enterprise-B model\u003c\/strong\u003e is a physical Star Trek display ship, 3D printed in PLA and fully assembled in Sydney. Choose default or custom registry and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDefault or Customized?\u003c\/strong\u003e Default prints the NCC-1701-B registry. Customized lets you specify a different Excelsior-class registry — send the number with your order. Same price either way.\u003c\/p\u003e\u003cp\u003eAt 50 cm this needs about 54 cm of clear run. The Excelsior is a long hull with a slim profile, so depth is not the constraint.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Customized mean?\u003c\/strong\u003e\u003cbr\u003eWe print a registry number you choose instead of NCC-1701-B. Send it with your order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e50 cm \/ 19.6 inches. Allow about 54 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Default","offer_id":41842763038763,"sku":"PV-0054-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ Customized","offer_id":41842763071531,"sku":"PV-0054-B","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Default","offer_id":41842763104299,"sku":"PV-0054-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Customized","offer_id":41842763137067,"sku":"PV-0054-D","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/677ecfc5-il_fullxfull.6241308478_scs8.jpg?v=1750116950"},{"product_id":"miranda-class-ncc-1864-reliant-3d-printable-replica-fully-colored-and-assembled","title":"Miranda Class NCC-1864 Reliant","description":"\u003cp\u003e\u003cstrong\u003eThe 11-inch (28 cm) USS Reliant NCC-1864 model\u003c\/strong\u003e is a physical Star Trek II: The Wrath of Khan display ship, 3D printed in multi-colour PLA. Choose fully coloured or glow-in-the-dark, pre-assembled or DIY kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003eAt 28 cm this is one of the easiest Star Trek models to place: a desk, a cabinet, a normal shelf.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e28 cm \/ 11 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the rollbar a separate part?\u003c\/strong\u003e\u003cbr\u003eIt is part of the printed model and arrives fitted on the Pre-Assembled option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price; the kit ships unassembled, no glue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Pre-Assembled","offer_id":41842761662507,"sku":"PV-0055-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kit","offer_id":41842761695275,"sku":"PV-0055-B","price":179.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ Pre-Assembled","offer_id":41842761728043,"sku":"PV-0055-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ DIY Kit","offer_id":41842761760811,"sku":"PV-0055-D","price":179.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/31f3c343-il_fullxfull.6383469265_magu.jpg?v=1750116949"},{"product_id":"17-inch-neo-constitution-class-ncc-1701-g-enterprise-3d-printable-replica-fully-colored-and-assembled","title":"17-inch Neo Constitution Class NCC-1701-G Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 17-inch USS Enterprise-G model\u003c\/strong\u003e is a physical Star Trek: Picard display ship, 3D printed in PLA and fully assembled in Sydney. Choose NCC-1701-G Enterprise or NCC-80102-A Titan hull markings when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 17 inches suits a bookshelf — allow about 48 cm. The 21.5-inch versions are \u003ca href=\"\/products\/21-5-inch-neo-constitution-class-ncc-1701-g-enterprise-large-3d-printable-enterprise-replica-fully-colored-and-assembled\"\u003e21.5-inch Neo Constitution Class NCC-1701-G Enterprise (Large)\u003c\/a\u003e and \u003ca href=\"\/products\/21-5-inch-neo-constitution-class-ncc80102-a-titan-large-3d-printable-titan-replica-fully-colored-and-assembled\"\u003e21.5-inch Neo Constitution Class NCC80102-A Titan (Large)\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the two registries?\u003c\/strong\u003e\u003cbr\u003eOnly the hull markings. 1701-G is the Enterprise; 80102-A is the Titan. The model is the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e44 cm \/ 17 inches. Allow about 48 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger one?\u003c\/strong\u003e\u003cbr\u003eYes — 21.5 inch (55 cm) versions of both registries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill layer lines show?\u003c\/strong\u003e\u003cbr\u003eUp close, yes. Normal for FDM, invisible at display distance.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"NCC1701-G Enterprise \/ Fully coloured","offer_id":41842761859115,"sku":"PV-0056-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"NCC1701-G Enterprise \/ Glow in the dark","offer_id":41842761891883,"sku":"PV-0056-B","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"NCC80102-A Titan \/ Fully coloured","offer_id":41842761924651,"sku":"PV-0056-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"NCC80102-A Titan \/ Glow in the dark","offer_id":41842761957419,"sku":"PV-0056-D","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/a181c891-il_fullxfull.6714698564_la9l.jpg?v=1750116949"},{"product_id":"12-inch-galaxy-class-ncc-1701-d-enterprise-3d-printable-replica-fully-colored-and-assembled","title":"12-inch Galaxy Class NCC-1701-D Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 12-inch (31 cm) USS Enterprise-D model\u003c\/strong\u003e is a physical Star Trek: The Next Generation display ship, 3D printed in multi-colour PLA and supplied fully assembled. Choose fully coloured or glow-in-the-dark finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e at 31 cm this is the easiest Enterprise to place — a desk, a cabinet shelf, a standard bookshelf. The larger \u003ca href=\"\/products\/14-inch-galaxy-class-ncc-1701-d-enterprise-large-3d-printable-replica-fully-colored-and-assembled\"\u003e14.5-inch Galaxy Class NCC-1701-D Enterprise (Large)\u003c\/a\u003e at 37 cm resolves the saucer detailing more finely.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e31 cm \/ 12 inches. It fits almost anywhere.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes, fully assembled and colour-printed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-inch or 14.5-inch?\u003c\/strong\u003e\u003cbr\u003e12-inch fits anywhere. 14.5-inch (37 cm) is the display version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored","offer_id":41842761596971,"sku":"PV-0057-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":41842761629739,"sku":"PV-0057-B","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/0ec3fabf-il_fullxfull.6383479505_9b7f.jpg?v=1750116950"},{"product_id":"29th-century-tricorder-and-display-stand-3d-printed-fully-colored-and-assembled","title":"29th Century Tricorder and Display Stand","description":"\u003cp\u003e\u003cstrong\u003eThe 29th-century tricorder replica\u003c\/strong\u003e is a physical Star Trek: Voyager display prop, 3D printed in PLA and made in Sydney. Choose the full set, tricorder only or stand only in light or dark gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — tricorder + stand \u003cem\u003eAU$109.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTricorder only\u003c\/strong\u003e — the unit on its own \u003cem\u003eAU$104.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLight Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eDark Gray\u003c\/strong\u003e is the same part darker. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it open or light up?\u003c\/strong\u003e\u003cbr\u003eNo — solid display prop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pairs with it?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"\/products\/29th-century-phaser-with-stand-3d-printed-fully-colored-and-assembled\"\u003e29th Century Phaser with Stand\u003c\/a\u003e is from the same 29th-century set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich grey should I pick?\u003c\/strong\u003e\u003cbr\u003eLight Gray matches the photos. Dark Gray is the same part in a darker body.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set \/ Light Gray as Photos","offer_id":41842762448939,"sku":"PV-0062-A","price":109.95,"currency_code":"AUD","in_stock":true},{"title":"Full set \/ Dark Gray","offer_id":41842762481707,"sku":"PV-0062-B","price":109.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder only \/ Light Gray as Photos","offer_id":41842762514475,"sku":"PV-0062-C","price":104.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder only \/ Dark Gray","offer_id":41842762547243,"sku":"PV-0062-D","price":104.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray as Photos","offer_id":41842762580011,"sku":"PV-0062-E","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray","offer_id":41842762612779,"sku":"PV-0062-F","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/1fe19547-il_fullxfull.6732917508_3qyq.jpg?v=1750116949"},{"product_id":"13-inch-enterprise-nx-class-enterprise-nx-refit-fully-colored-and-assembled-3d-printed","title":"13-inch NX Class Enterprise Refit","description":"\u003cp\u003e\u003cstrong\u003eThe 13-inch Enterprise NX-01 refit model\u003c\/strong\u003e is a physical Star Trek display ship with the secondary hull, 3D printed in PLA and fully assembled in Sydney.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 33 cm shelves easily. The larger \u003ca href=\"\/products\/16-inch-nx-class-enterprise-refit-model-large-3d-printed-starship-fully-color-and-assembled\"\u003e16-inch NX Class Enterprise Refit Model (Large)\u003c\/a\u003e at 41 cm is the display version. For the original NX-01 hull, see \u003ca href=\"\/products\/13-inch-enterprise-nx-class-spaceship-fully-colored-and-assembled-3d-printed\"\u003e13-inch NX Class Enterprise\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference from the standard NX-01?\u003c\/strong\u003e\u003cbr\u003eThe refit adds the secondary hull and the heavier weapons fit. Different model, not a repaint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e33 cm \/ 13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger one?\u003c\/strong\u003e\u003cbr\u003eYes, 16 inch (41 cm).\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full colored","offer_id":41842762186795,"sku":"PV-0064-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":41842762219563,"sku":"PV-0064-B","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7138527209_gnrm_574e4416-a09a-47d8-ba4e-13ab04c3d5b8.jpg?v=1785826434"},{"product_id":"ferengi-hand-phaser-with-stand-3d-printed-fully-colored-and-assembled","title":"Ferengi Hand Phaser with Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Ferengi hand phaser replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the full set, phaser only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — phaser + stand \u003cem\u003eAU$69.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$64.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it shaped like that?\u003c\/strong\u003e\u003cbr\u003eFerengi weapon design is deliberately organic and asymmetric — it reads very differently on a shelf next to Starfleet props.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set","offer_id":41842762252331,"sku":"PV-0066-A","price":69.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only","offer_id":41842762285099,"sku":"PV-0066-B","price":64.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only","offer_id":41842762317867,"sku":"PV-0066-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/accebb4a-il_fullxfull.6910660969_877s.jpg?v=1750116949"},{"product_id":"lower-decks-phaser-with-stand-and-holster-3d-printed-fully-colored-and-assembled","title":"Lower Decks Phaser with Stand and Holster","description":"\u003cp\u003e\u003cstrong\u003eThe Lower Decks phaser replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the phaser, holster, stand or full set in dark or light gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set (w Holster)\u003c\/strong\u003e — phaser + holster + stand \u003cem\u003eAU$94.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser + Stand\u003c\/strong\u003e — for display \u003cem\u003eAU$89.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser + Holster\u003c\/strong\u003e — for wearing \u003cem\u003eAU$89.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$84.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDark Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eLight Gray\u003c\/strong\u003e is the same part paler. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the animated design work as a physical prop?\u003c\/strong\u003e\u003cbr\u003eThe Lower Decks props are drawn from the live-action designs, so they translate cleanly to a printed object.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set (w Holster) \/ Dark Gray as Photos","offer_id":41842762645547,"sku":"PV-0067-A","price":94.95,"currency_code":"AUD","in_stock":true},{"title":"Full set (w Holster) \/ Light Gray","offer_id":41842762678315,"sku":"PV-0067-B","price":94.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Holster \/ Dark Gray as Photos","offer_id":41842762711083,"sku":"PV-0067-C","price":89.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser + Holster \/ Light Gray","offer_id":41842762743851,"sku":"PV-0067-D","price":89.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Dark Gray as Photos","offer_id":41842762776619,"sku":"PV-0067-E","price":84.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Light Gray","offer_id":41842762809387,"sku":"PV-0067-F","price":84.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray as Photos","offer_id":41842762842155,"sku":"PV-0067-G","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray","offer_id":41842762874923,"sku":"PV-0067-H","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Holster only \/ Dark Gray as Photos","offer_id":41842762907691,"sku":"PV-0067-I","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Holster only \/ Light Gray","offer_id":41842762940459,"sku":"PV-0067-J","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/75e72814-il_fullxfull.6910638859_geop.jpg?v=1750116949"},{"product_id":"tng-tr-560-tricorder-magnetic-open-close-scanner-attachments-3d-printed-fully-colored-with-stand","title":"TNG TR-560 Tricorder - Magnetic Open\/Close \u0026 Scanner Attachments","description":"\u003cp\u003e\u003cstrong\u003eThe TR-560 tricorder replica\u003c\/strong\u003e is a physical Star Trek: The Next Generation display prop with magnetic open\/close action and detachable scanner. Choose stand, holster and colour options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Stand \u0026amp; Holster\u003c\/strong\u003e — tricorder + stand + holster \u003cem\u003eAU$269.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Stand\u003c\/strong\u003e — for display \u003cem\u003eAU$264.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Holster\u003c\/strong\u003e — for wearing \u003cem\u003eAU$264.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTricorder Only\u003c\/strong\u003e — the unit on its own \u003cem\u003eAU$259.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLight Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eDark Gray\u003c\/strong\u003e is the same part darker. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat actually moves?\u003c\/strong\u003e\u003cbr\u003eThe lid opens and closes and holds shut on magnets. The scanner attachment lifts out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo — the movement is mechanical, there are no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it more than the other tricorders?\u003c\/strong\u003e\u003cbr\u003eMore parts, magnets, and hand-fitting. The fixed-body \u003ca href=\"\/products\/nemesis-tricorder-and-stand-3d-printed-fully-colored-and-assembled\"\u003eNemesis Tricorder and Stand\u003c\/a\u003e is the simpler option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I wear it?\u003c\/strong\u003e\u003cbr\u003eYes — choose an option that includes the holster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"With Stand \u0026 Holster \/ Light Gray as Photos","offer_id":41842763202603,"sku":"PV-0069-A","price":269.95,"currency_code":"AUD","in_stock":true},{"title":"With Stand \u0026 Holster \/ Dark Gray","offer_id":41842763235371,"sku":"PV-0069-B","price":269.95,"currency_code":"AUD","in_stock":true},{"title":"With Stand \/ Light Gray as Photos","offer_id":41842763268139,"sku":"PV-0069-C","price":264.95,"currency_code":"AUD","in_stock":true},{"title":"With Stand \/ Dark Gray","offer_id":41842763300907,"sku":"PV-0069-D","price":264.95,"currency_code":"AUD","in_stock":true},{"title":"With Holster \/ Light Gray as Photos","offer_id":41842763333675,"sku":"PV-0069-E","price":264.95,"currency_code":"AUD","in_stock":true},{"title":"With Holster \/ Dark Gray","offer_id":41842763366443,"sku":"PV-0069-F","price":264.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder Only \/ Light Gray as Photos","offer_id":41842763399211,"sku":"PV-0069-G","price":259.95,"currency_code":"AUD","in_stock":true},{"title":"Tricorder Only \/ Dark Gray","offer_id":41842763431979,"sku":"PV-0069-H","price":259.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray as Photos","offer_id":41842763464747,"sku":"PV-0069-I","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray","offer_id":41842763497515,"sku":"PV-0069-J","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/1dc0192b-il_fullxfull.6858660392_9zno.jpg?v=1750116949"},{"product_id":"tng-dust-buster-phaser-with-stand-tng-phaser-3d-printed-fully-colored-and-assembled","title":"TNG Dust Buster Phaser with Stand - TNG Phaser","description":"\u003cp\u003e\u003cstrong\u003eThe TNG Dustbuster phaser replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the full set, phaser only or stand only in dark or light gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — phaser + stand \u003cem\u003eAU$89.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser Only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$84.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDark Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eLight Gray\u003c\/strong\u003e is the same part paler. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it compare to the Cobrahead?\u003c\/strong\u003e\u003cbr\u003eThe dust buster is the season-one design; the \u003ca href=\"\/products\/tng-cobrahead-phaser-with-stand-the-next-generation-phaser-3d-printed-fully-colored-and-assembled\"\u003eTNG Cobrahead Phaser with stand - The Next Generation Phaser\u003c\/a\u003e is the later, sleeker replacement.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set \/ Dark Gray as Photos","offer_id":41842763989035,"sku":"PV-0074-A","price":89.95,"currency_code":"AUD","in_stock":true},{"title":"Full set \/ Light Gray","offer_id":41842764021803,"sku":"PV-0074-B","price":89.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser Only \/ Dark Gray as Photos","offer_id":41842764054571,"sku":"PV-0074-C","price":84.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser Only \/ Light Gray","offer_id":41842764087339,"sku":"PV-0074-D","price":84.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray as Photos","offer_id":41842764120107,"sku":"PV-0074-E","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray","offer_id":41842764152875,"sku":"PV-0074-F","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/3682d0ba-il_fullxfull.6871549117_qz3r.jpg?v=1750116950"},{"product_id":"cortical-stimulator-3d-printed-fully-colored-and-assembled","title":"Cortical stimulator","description":"\u003cp\u003e\u003cstrong\u003eThe cortical stimulator replica\u003c\/strong\u003e is a physical Star Trek medical display prop, 3D printed in PLA, fully assembled and made in Sydney.\u003c\/p\u003e\u003cp\u003ePairs with the \u003ca href=\"\/products\/voy-dermal-regenerator-3d-printed-fully-colored-and-assembled\"\u003eVOY Dermal Regenerator\u003c\/a\u003e and the \u003ca href=\"\/products\/tng-voy-exoscalpel-3d-printed-fully-colored-and-assembled\"\u003eTNG\/VOY Exoscalpel\u003c\/a\u003e if you are building the sickbay set.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eIt is a small handheld device, sized to the on-screen prop. Check the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eIt ships as shown in the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat else is in the sickbay set?\u003c\/strong\u003e\u003cbr\u003eThe dermal regenerator and the exoscalpel.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":41842763923499,"sku":"PV-0076","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/2589c239-il_fullxfull.6910557911_mc0c.jpg?v=1750116950"},{"product_id":"29th-century-phaser-with-stand-3d-printed-fully-colored-and-assembled","title":"29th Century Phaser with Stand","description":"\u003cp\u003e\u003cstrong\u003eThe 29th-century phaser replica\u003c\/strong\u003e is a physical Star Trek: Voyager display prop, 3D printed in PLA and made in Sydney. Choose the full set, phaser only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Set\u003c\/strong\u003e — phaser + stand \u003cem\u003eAU$79.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser Only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$74.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand Only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat pairs with it?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"\/products\/29th-century-tricorder-and-display-stand-3d-printed-fully-colored-and-assembled\"\u003e29th Century Tricorder and Display Stand\u003c\/a\u003e is from the same 29th-century set.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full Set","offer_id":41842764185643,"sku":"PV-0077-A","price":79.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser Only","offer_id":41842764218411,"sku":"PV-0077-B","price":74.95,"currency_code":"AUD","in_stock":true},{"title":"Stand Only","offer_id":41842764251179,"sku":"PV-0077-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/308e30bc-il_fullxfull.6795615240_t22a.jpg?v=1750116953"},{"product_id":"tng-type-i-phaser-with-stand-tng-3d-printed-fully-colored-and-assembled","title":"TNG Type I Phaser with Stand","description":"\u003cp\u003e\u003cstrong\u003eThe TNG Type 1 phaser replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the full set, phaser only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — phaser + stand \u003cem\u003eAU$89.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$84.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003eIt is the compact Type I, not the full Type II hand phaser. Check the photos for scale.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set","offer_id":41842764283947,"sku":"PV-0079-A","price":89.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only","offer_id":41842764316715,"sku":"PV-0079-B","price":84.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only","offer_id":41842764349483,"sku":"PV-0079-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/ee080a1d-il_fullxfull.6795689899_bee5.jpg?v=1750116950"},{"product_id":"20-inch-constitution-refit-ncc-1701-a-enterprise-large-3d-printed-fully-colored-and-assembled","title":"20-inch Constitution Refit NCC-1701-A Enterprise (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 20-inch USS Enterprise-A model\u003c\/strong\u003e is a large physical Star Trek display ship, 3D printed in PLA and made in Sydney. Choose pre-assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 52 cm needs a wide shelf or sideboard; allow about 56 cm. The \u003ca href=\"\/products\/17-inch-constitution-refit-ncc-1701-a-enterprise-3d-printed-fully-colored-and-assembled\"\u003e17-inch Constitution Refit NCC-1701-A Enterprise\u003c\/a\u003e is the same ship at a size that fits a normal bookshelf.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e52 cm \/ 20 inches. Allow about 56 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the extra size buy me?\u003c\/strong\u003e\u003cbr\u003eThe aztec panelling and the engineering hull detail read individually rather than as texture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully coloured \/ Pre-Assembled","offer_id":41842764578859,"sku":"PV-0080-A","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Fully coloured \/ DIY Kit","offer_id":41842764611627,"sku":"PV-0080-B","price":209.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ Pre-Assembled","offer_id":41842764644395,"sku":"PV-0080-C","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ DIY Kit","offer_id":41842764677163,"sku":"PV-0080-D","price":259.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/a8af4ed4-il_fullxfull.6761626706_o774.jpg?v=1750116950"},{"product_id":"17-inch-constitution-refit-ncc-1701-a-enterprise-3d-printed-fully-colored-and-assembled","title":"17-inch Constitution Refit NCC-1701-A Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 17-inch USS Enterprise-A model\u003c\/strong\u003e is a physical Star Trek display ship, 3D printed in PLA and made in Sydney. Choose pre-assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 17 inches fits most bookshelves — allow about 48 cm. The larger \u003ca href=\"\/products\/20-inch-constitution-refit-ncc-1701-a-enterprise-large-3d-printed-fully-colored-and-assembled\"\u003e20-inch Constitution Refit NCC-1701-A Enterprise (Large)\u003c\/a\u003e at 52 cm is the centrepiece version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e44 cm \/ 17 inches. Allow about 48 cm of shelf.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the aztec panelling painted on?\u003c\/strong\u003e\u003cbr\u003eNo. It is printed in multi-colour PLA, so it cannot wear off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e17-inch or 20-inch?\u003c\/strong\u003e\u003cbr\u003e17-inch shelves comfortably; 20-inch (52 cm) is the statement size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price. The kit ships unassembled, no glue.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully coloured \/ Pre-Assembled","offer_id":41842765463595,"sku":"PV-0087-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully coloured \/ DIY Kit","offer_id":41842765496363,"sku":"PV-0087-B","price":176.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ Pre-Assembled","offer_id":41842765529131,"sku":"PV-0087-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ DIY Kit","offer_id":41842765561899,"sku":"PV-0087-D","price":219.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/c4e32ba8-il_fullxfull.6761626706_o774.jpg?v=1750116954"},{"product_id":"13-inch-enterprise-nx-class-spaceship-fully-colored-and-assembled-3d-printed","title":"13-inch NX Class Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 13-inch (33 cm) Enterprise NX-01 model\u003c\/strong\u003e is a physical Star Trek: Enterprise display ship, 3D printed in multi-colour PLA and supplied fully assembled. Choose fully coloured or glow-in-the-dark finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 33 cm shelves easily. The larger \u003ca href=\"\/products\/16-inch-nx-class-enterprise-spaceship-large-fully-colored-and-assembled-3d-printed\"\u003e16-inch NX Class Enterprise Spaceship (Large)\u003c\/a\u003e at 41 cm is the display version. If you want the \u003cem\u003erefit\u003c\/em\u003e hull instead of the original, see \u003ca href=\"\/products\/13-inch-enterprise-nx-class-enterprise-nx-refit-fully-colored-and-assembled-3d-printed\"\u003e13-inch NX Class Enterprise Refit\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the original NX-01 or the refit?\u003c\/strong\u003e\u003cbr\u003eThe original. The refit is listed separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e33 cm \/ 13 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full colored","offer_id":41842765856811,"sku":"PV-0093-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":41842765889579,"sku":"PV-0093-B","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/86ddc163-il_fullxfull.6823584604_gi76.jpg?v=1750116949"},{"product_id":"9-6-inch-defiant-class-nx-74205-defiant-large-3d-printable-fully-colored-and-assembled","title":"9.6-Inch Defiant Class NX-74205 Defiant (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 9.6-inch (25 cm) USS Defiant NX-74205 model\u003c\/strong\u003e is a physical Star Trek: Deep Space Nine display ship, 3D printed in multi-colour PLA. Choose fully coloured or glow-in-the-dark, pre-assembled or DIY kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 25 cm sits comfortably on a shelf. The \u003ca href=\"\/products\/7-4-inch-defiant-class-nx-74205-defiant-3d-printable-fully-colored-and-assembled\"\u003e7.4-Inch Defiant Class NX-74205 Defiant\u003c\/a\u003e at 19 cm is the desk-sized version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e25 cm \/ 9.6 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose this over the 7.4-inch?\u003c\/strong\u003e\u003cbr\u003eThe pennant markings and the weapons pods read clearly at this size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eThe model is supplied as shown in the photos — check the images.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full colored \/ Pre-Assembled","offer_id":41842765922347,"sku":"PV-0094-A","price":249.96,"currency_code":"AUD","in_stock":true},{"title":"Full colored \/ DIY Kit","offer_id":41842765955115,"sku":"PV-0094-B","price":189.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ Pre-Assembled","offer_id":41842765987883,"sku":"PV-0094-C","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ DIY Kit","offer_id":41842766020651,"sku":"PV-0094-D","price":189.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/6f52d1c8-il_fullxfull.6575061896_fr41.jpg?v=1750116950"},{"product_id":"21-5-inch-neo-constitution-class-ncc80102-a-titan-large-3d-printable-titan-replica-fully-colored-and-assembled","title":"21.5-inch Neo Constitution Class NCC80102-A Titan (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 21.5-inch (55 cm) USS Titan NCC-80102-A model\u003c\/strong\u003e is a physical Star Trek: Picard display ship, 3D printed in multi-colour PLA. Choose fully coloured or glow-in-the-dark, pre-assembled or DIY kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 55 cm wants a sideboard or wide shelf; allow about 60 cm. The \u003ca href=\"\/products\/17-inch-neo-constitution-class-ncc-80102-a-titan-3d-printable-replica-fully-colored-and-assembl\"\u003e17-inch Neo Constitution Class NCC-80102-A Titan\u003c\/a\u003e is the bookshelf size. For the Enterprise registry at this size, see \u003ca href=\"\/products\/21-5-inch-neo-constitution-class-ncc-1701-g-enterprise-large-3d-printable-enterprise-replica-fully-colored-and-assembled\"\u003e21.5-inch Neo Constitution Class NCC-1701-G Enterprise (Large)\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e55 cm \/ 21.5 inches. Allow about 60 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same model as the 1701-G?\u003c\/strong\u003e\u003cbr\u003eYes — identical hull, different registry markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a smaller one?\u003c\/strong\u003e\u003cbr\u003eYes, 17 inch (44 cm).\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Pre-Assembled","offer_id":41842766086187,"sku":"PV-0095-A","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kit","offer_id":41842766118955,"sku":"PV-0095-B","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Pre-Assembled","offer_id":41842766151723,"sku":"PV-0095-C","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kit","offer_id":41842766184491,"sku":"PV-0095-D","price":199.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/5cb4275e-il_fullxfull.6762732781_qvyx.jpg?v=1750116951"},{"product_id":"tng-cobrahead-phaser-with-stand-the-next-generation-phaser-3d-printed-fully-colored-and-assembled","title":"TNG Cobrahead Phaser with stand - The Next Generation Phaser","description":"\u003cp\u003e\u003cstrong\u003eThe TNG Cobrahead phaser replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the full set, phaser only or stand only in dark or light gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — phaser + stand \u003cem\u003eAU$74.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhaser only\u003c\/strong\u003e — the phaser on its own \u003cem\u003eAU$69.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDark Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eLight Gray\u003c\/strong\u003e is the same part paler. Same price.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up or make sounds?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCobrahead or dust buster?\u003c\/strong\u003e\u003cbr\u003eThe cobrahead is the later, sleeker design most people picture as 'the TNG phaser'. The \u003ca href=\"\/products\/tng-dust-buster-phaser-with-stand-tng-phaser-3d-printed-fully-colored-and-assembled\"\u003eTNG Dust Buster Phaser with Stand - TNG Phaser\u003c\/a\u003e is the season-one original.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Full set \/ Dark Gray as Photos","offer_id":41842767101995,"sku":"PV-0097-A","price":74.95,"currency_code":"AUD","in_stock":true},{"title":"Full set \/ Light Gray","offer_id":41842767134763,"sku":"PV-0097-B","price":74.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Dark Gray as Photos","offer_id":41842767167531,"sku":"PV-0097-C","price":69.95,"currency_code":"AUD","in_stock":true},{"title":"Phaser only \/ Light Gray","offer_id":41842767200299,"sku":"PV-0097-D","price":69.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Dark Gray as Photos","offer_id":41842767233067,"sku":"PV-0097-E","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only \/ Light Gray","offer_id":41842767265835,"sku":"PV-0097-F","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/150e3df4-il_fullxfull.6773160086_b47a.jpg?v=1750116953"},{"product_id":"14-inch-declaration-class-xcv-330-enterprise-3d-printed-replica-fully-colored-and-assembled","title":"14-inch Declaration Class XCV-330 Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 14-inch XCV-330 Enterprise model\u003c\/strong\u003e is a physical Star Trek display ship, 3D printed in PLA and made in Sydney. Choose pre-assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote on options:\u003c\/strong\u003e unlike most of our ships, the four options here are \u003cem\u003edifferently priced\u003c\/em\u003e. Fully colored Pre-Assembled and DIY Kit, and Glow in the dark Pre-Assembled and DIY Kit, each carry their own price — check the option you select.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003eAt 35 cm the ring is the widest part, so allow a little more depth than a conventional hull needs.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the options have different prices?\u003c\/strong\u003e\u003cbr\u003eThe glow filament costs more, and the assembled versions include the build time. Each combination is priced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e35 cm \/ 14 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ring a separate piece?\u003c\/strong\u003e\u003cbr\u003eIt is part of the model; the Pre-Assembled option arrives fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Fully colored \/ Pre-Assembled","offer_id":41842767298603,"sku":"PV-0104-A","price":239.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kit","offer_id":41842767331371,"sku":"PV-0104-B","price":159.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Pre-Assembled","offer_id":41842767364139,"sku":"PV-0104-C","price":259.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kit","offer_id":41842767396907,"sku":"PV-0104-D","price":189.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/d81a5b43-il_fullxfull.6255374699_edjz.jpg?v=1750116950"},{"product_id":"dolphin-phaser-with-stand-3d-printed-fully-colored-and-assembled","title":"Dolphin Phaser with Stand","description":"\u003cp\u003e\u003cstrong\u003eA physical Dolphin Phaser replica with display stand from Star Trek: Nemesis.\u003c\/strong\u003e Colour-printed in PLA and hand-assembled in Sydney, this curved Type II phaser is named for its profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDark Gray as Photos\u003c\/strong\u003e is the finish shown; \u003cstrong\u003eLight Gray\u003c\/strong\u003e is the same part in a paler body. Same price either way.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs the display stand included with the Dolphin Phaser replica?\u003c\/strong\u003e\u003cbr\u003eYes, the stand is included in both colour options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo — display and cosplay prop, no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich grey should I pick?\u003c\/strong\u003e\u003cbr\u003eDark Gray matches the photos. Light Gray is the same part, lighter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a holster?\u003c\/strong\u003e\u003cbr\u003eNo holster on this one. The \u003ca href=\"\/products\/lower-decks-phaser-with-stand-and-holster-3d-printed-fully-colored-and-assembled\"\u003eLower Decks Phaser with Stand and Holster\u003c\/a\u003e and the \u003ca href=\"\/products\/first-contact-boomerang-phaser-with-stand-3d-printed-fully-colored-and-assembled\"\u003eFirst Contact Boomerang Phaser with Stand\u003c\/a\u003e have holster options.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Dark Gray as Photos","offer_id":41842766839851,"sku":"PV-0105-A","price":64.95,"currency_code":"AUD","in_stock":true},{"title":"Light Gray","offer_id":41842766872619,"sku":"PV-0105-B","price":64.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7462777340_mfrv.jpg?v=1785826334"},{"product_id":"18-5-inch-constitution-class-ncc-1701-enterprise-3d-printable-replica-fully-colored-and-assembl","title":"18.5-inch Constitution Class NCC-1701 Enterprise","description":"\u003cp\u003e\u003cstrong\u003eThe 18.5-inch USS Enterprise NCC-1701 model\u003c\/strong\u003e is a physical Star Trek: The Original Series display ship, 3D printed in PLA. Choose assembled or DIY kit and fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-Assembled or DIY Kit?\u003c\/strong\u003e Identical parts at the same price. Pre-Assembled arrives built and ready to display; the DIY Kit ships as printed parts for you to put together. No glue included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e at 47 cm this wants a wide shelf or a sideboard; allow about 52 cm. If that is more than you have, the \u003ca href=\"\/products\/16-inch-constitution-class-ncc-1701-enterprise-3d-printable-replica-fully-colored-and-assembled\"\u003e16-inch Constitution Class NCC-1701 Enterprise\u003c\/a\u003e is the shelf-friendly size.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e47 cm \/ 18.5 inches. Allow about 52 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is it more than the 16-inch?\u003c\/strong\u003e\u003cbr\u003eMore material and a longer print. At this scale the saucer pennant and hull panelling resolve noticeably better.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembled or kit?\u003c\/strong\u003e\u003cbr\u003eSame parts and price; the kit is yours to build.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Fully colored \/ Assembled","offer_id":44569217400875,"sku":"PV-0132-A","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ DIY Kits","offer_id":44569217433643,"sku":"PV-0132-B","price":219.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Assembled","offer_id":44569217466411,"sku":"PV-0132-C","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ DIY Kits","offer_id":44569217499179,"sku":"PV-0132-D","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.6241664472_rcq2.jpg?v=1785809171"},{"product_id":"12-inch-romulan-warbird-b-type-d-deridex-3d-printable-enterprise-replica-fully-colored-and-asse","title":"12-inch Romulan Warbird B-type D'deridex","description":"\u003cp\u003e\u003cstrong\u003eThe Romulan D'deridex Warbird model\u003c\/strong\u003e is a physical Star Trek: The Next Generation display ship, 3D printed in PLA and made in Sydney. Choose 9-inch or 12-inch size and fully coloured or single-colour green finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Single color (Green)?\u003c\/strong\u003e Fully colored is the screen scheme with the wing markings picked out. Single color prints the whole hull in green — cleaner, more sculptural, and it shows the double-hull geometry without the surface detail competing.\u003c\/p\u003e\u003cp\u003eThe D'deridex is a wide, forked hull, so it takes more shelf \u003cem\u003edepth\u003c\/em\u003e than its length suggests — allow room on both axes.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich size should I get?\u003c\/strong\u003e\u003cbr\u003e23 cm \/ 9 inch for a desk, 30 cm \/ 12 inch for a shelf display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the colour options?\u003c\/strong\u003e\u003cbr\u003eFully colored has the screen markings; Single color is a solid green print with no surface markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the price the same for all four combinations?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it come with a stand?\u003c\/strong\u003e\u003cbr\u003eThe model is supplied as shown in the photos.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Fully colored \/ Standard 23cm\/9inch","offer_id":44569218154539,"sku":"PV-0140-A","price":129.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ Large 30cm\/12inch","offer_id":44569218187307,"sku":"PV-0140-B","price":149.95,"currency_code":"AUD","in_stock":true},{"title":"Single color (Green) \/ Standard 23cm\/9inch","offer_id":44569218220075,"sku":"PV-0140-C","price":79.95,"currency_code":"AUD","in_stock":true},{"title":"Single color (Green) \/ Large 30cm\/12inch","offer_id":44569218252843,"sku":"PV-0140-D","price":99.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7011059469_ar4v.jpg?v=1785809179"},{"product_id":"17-inch-intrepid-class-ncc-74656-voyager-large-3d-printable-enterprise-replica-fully-colored-an","title":"17-inch Intrepid Class NCC-74656 Voyager (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 17-inch (43 cm) USS Voyager NCC-74656 model\u003c\/strong\u003e is a physical Star Trek display ship, 3D printed in multi-colour PLA and supplied fully assembled. Choose fully coloured or glow-in-the-dark finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 43 cm needs about 47 cm of clear run. The \u003ca href=\"\/products\/13-8-inch-intrepid-class-ncc-74656-voyager-3d-printable-enterprise-replica-fully-colored-and-assembled\"\u003e13.8-inch Intrepid Class NCC-74656 Voyager\u003c\/a\u003e is the compact version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e43 cm \/ 17 inches. Allow about 47 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the extra size buy me?\u003c\/strong\u003e\u003cbr\u003eThe hull plating and the deflector detail resolve individually instead of reading as texture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Fully colored","offer_id":44569224282155,"sku":"PV-0201-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":44569224314923,"sku":"PV-0201-B","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7236486713_igtz.jpg?v=1785809244"},{"product_id":"17-inch-neo-constitution-class-ncc-80102-a-titan-3d-printable-replica-fully-colored-and-assembl","title":"17-inch Neo Constitution Class NCC-80102-A Titan","description":"\u003cp\u003e\u003cstrong\u003eThe 17-inch USS Titan NCC-80102-A model\u003c\/strong\u003e is a physical Star Trek: Picard display ship, 3D printed in PLA and fully assembled in Sydney. Choose the Titan registry or request custom hull markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 17 inches shelves easily — allow about 48 cm. The larger \u003ca href=\"\/products\/21-5-inch-neo-constitution-class-ncc80102-a-titan-large-3d-printable-titan-replica-fully-colored-and-assembled\"\u003e21.5-inch Neo Constitution Class NCC80102-A Titan (Large)\u003c\/a\u003e at 55 cm is the centrepiece version.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Custom Registry mean?\u003c\/strong\u003e\u003cbr\u003eWe print the hull with a registry number you specify instead of NCC-80102-A. Send it with your order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e44 cm \/ 17 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same model as the 1701-G Enterprise?\u003c\/strong\u003e\u003cbr\u003eYes — same hull, different markings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a larger one?\u003c\/strong\u003e\u003cbr\u003eYes, 21.5 inch (55 cm).\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Fully coloured \/ NCC80102-A Titan","offer_id":44569224544299,"sku":"PV-0203-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully coloured \/ Custom Registry","offer_id":44569224577067,"sku":"PV-0203-B","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ NCC80102-A Titan","offer_id":44569224609835,"sku":"PV-0203-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark \/ Custom Registry","offer_id":44569224642603,"sku":"PV-0203-D","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.6714698564_la9l.jpg?v=1785809246"},{"product_id":"voyager-large-padd-with-stand-3d-printed-fully-colored-and-assembled","title":"Voyager large PADD with Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Voyager PADD replica\u003c\/strong\u003e is a physical Star Trek display prop, 3D printed in PLA and made in Sydney. Choose the full set, PADD only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — PADD + stand \u003cem\u003eAU$79.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePADD only\u003c\/strong\u003e — the PADD on its own \u003cem\u003eAU$74.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the screen graphics printed or a sticker?\u003c\/strong\u003e\u003cbr\u003ePrinted in multi-colour PLA. They cannot peel or fade.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Full set","offer_id":44569229361195,"sku":"PV-0237-A","price":79.95,"currency_code":"AUD","in_stock":true},{"title":"PADD only","offer_id":44569229393963,"sku":"PV-0237-B","price":74.95,"currency_code":"AUD","in_stock":true},{"title":"Stand only","offer_id":44569229426731,"sku":"PV-0237-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7236470181_17t4.jpg?v=1785809284"},{"product_id":"ds9-bajoran-padd-deep-space-3d-printed-fully-colored-and-assembled","title":"DS9 Bajoran PADD (Deep Space)","description":"\u003cp\u003e\u003cstrong\u003eThe Bajoran PADD replica\u003c\/strong\u003e is a physical Star Trek: Deep Space Nine display prop, 3D printed in PLA and made in Sydney. Choose the full set, PADD only or stand only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each option includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"list-style:disc;padding-left:1.25em\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull set\u003c\/strong\u003e — PADD + stand \u003cem\u003eAU$89.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePADD Only\u003c\/strong\u003e — the PADD on its own \u003cem\u003eAU$84.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand Only\u003c\/strong\u003e — a spare stand \u003cem\u003eAU$9.95\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it light up?\u003c\/strong\u003e\u003cbr\u003eNo. It is a display and cosplay prop with no electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a stand included?\u003c\/strong\u003e\u003cbr\u003eIn the Full set, yes. The 'only' options ship without one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the stand?\u003c\/strong\u003e\u003cbr\u003eYes — Stand only, AU$9.95.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the Starfleet PADDs?\u003c\/strong\u003e\u003cbr\u003eBajoran hardware is angular and asymmetric where Starfleet's is rounded. Different body, different graphics.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so the panel graphics and trim cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. It is a display and cosplay prop: nothing lights up, opens electronically or functions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display prop. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Full set","offer_id":44569229459499,"sku":"PV-0238-A","price":89.95,"currency_code":"AUD","in_stock":true},{"title":"PADD Only","offer_id":44569229492267,"sku":"PV-0238-B","price":84.95,"currency_code":"AUD","in_stock":true},{"title":"Stand Only","offer_id":44569229525035,"sku":"PV-0238-C","price":9.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7030120308_fa4v.jpg?v=1785809285"},{"product_id":"nova-class-cochrane-science-vessel-3d-printable-enterprise-replica-fully-colored-and-assembled","title":"Nova Class Cochrane Science Vessel","description":"\u003cp\u003e\u003cstrong\u003eThe Nova-class USS Equinox or Cochrane model\u003c\/strong\u003e is a physical Star Trek: Voyager display ship, 3D printed in PLA and made in Sydney. Choose NCC-72381 Equinox, NCC-59318 Cochrane or a custom registry, plus fully coloured or glow finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003eThe Nova is a compact survey ship rather than a capital hull, so it suits a desk or a shelf that could not take a Galaxy or a Sovereign.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between Cochrane, Equinox and Custom Registry?\u003c\/strong\u003e\u003cbr\u003eOnly the registry number and name printed on the hull. The model is identical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Custom Registry mean?\u003c\/strong\u003e\u003cbr\u003eSend us the registry you want with your order and we print that instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes, fully assembled and colour-printed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes, the base is removable.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Fully colored \/ NCC-59318 Cochrane","offer_id":44569230147627,"sku":"PV-0242-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ NCC-72381  Equinox","offer_id":44569230180395,"sku":"PV-0242-B","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Fully colored \/ Custom Registry","offer_id":44569230213163,"sku":"PV-0242-C","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ NCC-59318 Cochrane","offer_id":44569230245931,"sku":"PV-0242-D","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ NCC-72381  Equinox","offer_id":44569230278699,"sku":"PV-0242-E","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in dark \/ Custom Registry","offer_id":44569230311467,"sku":"PV-0242-F","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.8036268357_sk62.jpg?v=1785809290"},{"product_id":"18-inch-prometheus-prometheus-class-3d-printed-fully-colored-and-assembled","title":"18-inch Prometheus Class Prometheus","description":"\u003cp\u003e\u003cstrong\u003eThe 18-inch USS Prometheus model\u003c\/strong\u003e is a physical Star Trek: Voyager display ship, 3D printed in PLA and made in Sydney. Choose fully coloured or glow-in-the-dark finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e Full colored · Glow in the dark — all AU$239.95, so choose on looks and space rather than budget.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical item or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis listing is for physical 3D-printed PLA items. Options may include the model or prop, a display stand, or a set. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStar Trek or Stargate?\u003c\/strong\u003e\u003cbr\u003eStar Trek. Two unrelated ships share the name Prometheus, which trips people up constantly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it separate into three sections?\u003c\/strong\u003e\u003cbr\u003eIt is printed as the assembled ship. Check the photos.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e18 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the two options do?\u003c\/strong\u003e\u003cbr\u003eFully colored is the screen scheme; Glow in the dark uses phosphorescent filament. Same price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in PLA at a fine layer height, then hand-assembled and sanded back where needed. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Full colored","offer_id":44569231261739,"sku":"PV-0253-A","price":239.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":44569231294507,"sku":"PV-0253-B","price":289.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.6997368990_asoc.jpg?v=1785809301"},{"product_id":"16-inch-nx-class-enterprise-refit-model-large-3d-printed-starship-fully-color-and-assembled","title":"16-inch NX Class Enterprise Refit Model (Large)","description":"\u003cp\u003e\u003cstrong\u003eThe 16-inch Enterprise NX-01 refit model\u003c\/strong\u003e is a large physical Star Trek display ship with the secondary hull, 3D printed in PLA and fully assembled in Sydney.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully colored or Glow in the dark?\u003c\/strong\u003e Fully colored is the screen-accurate scheme. Glow in the dark uses phosphorescent filament on the hull so the ship reads as a silhouette in a dark room after it has been under light — it is a different look, not an add-on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e 41 cm needs about 45 cm of shelf. The \u003ca href=\"\/products\/13-inch-enterprise-nx-class-enterprise-nx-refit-fully-colored-and-assembled-3d-printed\"\u003e13-inch NX Class Enterprise Refit\u003c\/a\u003e is the compact version. For the original hull at this size, see \u003ca href=\"\/products\/16-inch-nx-class-enterprise-spaceship-large-fully-colored-and-assembled-3d-printed\"\u003e16-inch NX Class Enterprise Spaceship (Large)\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eQuestions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eIs this a physical model or a digital file?\u003c\/strong\u003e\u003cbr\u003eThis is a physical 3D-printed PLA display model. No STL or digital download is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference from the standard NX-01?\u003c\/strong\u003e\u003cbr\u003eThe refit has the secondary hull and heavier weapons. It is a different model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is it?\u003c\/strong\u003e\u003cbr\u003e41 cm \/ 16 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it arrive assembled?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it coloured?\u003c\/strong\u003e\u003cbr\u003eYes. The colour is printed into the model using multi-colour 3D printing — each colour is laid down in place as it prints, not painted on afterwards, so it cannot chip or flake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the stand come off?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003ch4\u003eHow it's made\u003c\/h4\u003e\u003cp\u003ePrinted in multi-colour PLA at a fine layer height, then hand-assembled and sanded back where needed. The colours are printed into the material rather than painted on, so hull pennants, registry numbers and aztec panelling cannot chip or flake. Made and finished in Sydney, Australia.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn honest note:\u003c\/strong\u003e this is FDM printing. Fine layer lines are visible up close — that is how the process works, not a defect. At normal display distance they disappear.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFan-made display model. Not affiliated with or endorsed by the rights holders of Star Trek.\u003c\/em\u003e\u003c\/p\u003e","brand":"Printverse3D","offers":[{"title":"Full colored","offer_id":44569231589419,"sku":"PV-0256-A","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Glow in the dark","offer_id":44569231622187,"sku":"PV-0256-B","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9318\/3531\/files\/il_fullxfull.7138527209_gnrm.jpg?v=1785809303"}],"url":"https:\/\/printverse3d.shop\/collections\/star-trek.oembed?page=2","provider":"Printverse3D","version":"1.0","type":"link"}